The EPEVER Tracer AN Sequence Photo voltaic Demand Controller can be a really efficient solar controller made for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Key Characteristics of your EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller technological know-how for top-quality photo voltaic Electrical power harvesting. Key features include:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Advanced MPPT Algorithm with >99% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Display screen with serious-time data checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections in opposition to overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all parts are provided: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Validate the design amount and voltage ratings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a effectively-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Caution: Normally follow correct safety protocols and make sure the technique is run off before connecting factors.
Move 1: Connect the battery terminals into the cost controller (optimistic to good, negative to detrimental).
Phase 2: Join the solar panel array towards the PV enter terminals.
Phase 3: Connect the load terminals if employing a immediate load connection.
Step 4: Double-check all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power to the controller by connecting the battery initially.
Utilize the LCD Show to navigate the configurations menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, gentle Regulate.
5. Checking and Knowledge Logging
The Tracer AN Series supports authentic-time checking using the MT50 remote meter.
Details might be logged by way of the RS485 conversation port using software package including Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
six. Troubleshooting Common Problems
Issue 1: No Electricity Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Difficulty two: Over-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Regulate program parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Electricity losses in the course of conversion.
Increased Reliability: Steady efficiency less than variable masses.
For a longer period Battery Existence: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification More info technological innovation is an Excellent option for optimizing solar power generation and increasing battery life. By adhering to the above mentioned set up guidebook, people can ensure highest performance and system longevity.