The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is often a extremely productive photo voltaic controller created for off-grid photo voltaic units. Depending on multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and program balance for a variety of photovoltaic (PV) purposes.
Important Functions of your EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Demand Controller engineering for excellent solar Power harvesting. Essential options consist of:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
State-of-the-art MPPT Algorithm with >ninety nine% effectiveness.
Twin-Phase Charging for Improved battery daily life.
LCD Screen with actual-time knowledge monitoring.
Various Load Control Modes such as handbook and timer.
Complete Electronic Protections against overcharging, in excess of-discharging, shorter circuits, and reverse polarity.
Step-by-Phase Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick out a very well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller using the furnished mounting brackets.
Keep suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Charge Controller
Warning: Constantly observe appropriate security protocols and make sure the procedure is driven off prior to connecting elements.
Stage 1: Join the battery terminals to your cost controller (good to favourable, detrimental to adverse).
Step two: Link the solar panel array towards the PV input terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Stage four: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Power to the controller by connecting the battery initially.
Make use of the Liquid crystal display Show to navigate Click Here the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light Regulate.
5. Monitoring and Knowledge Logging
The Tracer AN Sequence supports genuine-time checking utilizing the MT50 remote meter.
Facts is often logged by way of the RS485 interaction port working with application including Photo voltaic Station Personal computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Common Challenges
Situation 1: No Electricity Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Protection
Confirm the photo voltaic array’s voltage score.
Regulate program parameters if necessary.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT settings while in the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification know-how ensures:
Better Efficiency: Diminished energy losses for the duration of conversion.
Enhanced Dependability: Secure effectiveness beneath variable masses.
For a longer time Battery Life: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation can be an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and procedure longevity.